Ventilating Louver | Shinohara Electric Co.,Ltd.

TOP ＞Product＞Louver＞Ventilating Louver

Louver


Ventilating louver (Steel Type and Stainless steel Type)	Ventilating louver (The replacement of the filter at the front side)	Powerful jet-proof type louver	Double structure type louver

Seawater salt resistant type louver	Plastic Louver(Front opening and closing type)	Low profile jet-proof type louver	NEW The salt-resistant thin type jet-proof louver

Ventilating Louver(Steel Type and Stainless steel Type)

RoHS Compliant(The surface paintings are also RoHS compliant product.)

■Installation Method

IPX4 type insect net can be selected, if necessary.

Application

The products can be used for the ventilation components to the operation panel board, the control panel board,the distribution
panel board and the cubicle.

Features

1.	By using these ventilating louvers, the cutting process will not be needed in order to make a vent against the panel and the labor saving can be done sharply.
2.	A louver will be installed simply and can be attached to the front of the panel to fix it with the holding frame at the back of the panel by screws through the holes at the panel.
3.	The suitable louver will be selected for the applications by use of accessories such as a blow prevention cover, a insect net, a dust-proof filter and so on.
4.	The louver can be used for outdoors by use of a blow prevention cover, whose structure will remove the rainwater outward. (Please refer to IPX2.)

Product List

Installation Method	①Ventilating louver	②Water-proof packing	③Holding frame	④Blow prevention cover	⑤Insect screen	⑥Dust-proof filter	PartNo for Setting	OUT LINE
A	G2-15	G-PS15	G15-WS	-	-	-	G2-15-SET-A	①
	G2-20	G-PS20	G20-WD	-	-	-	G2-20-SET-A
	G1-15S(SUS）	G-PS15	G15-WS	-	-	-	G1-15S-SETA
	G1-20S(SUS）	G-PS20	G20-WD	-	-	-	G1-20S-SET-A
	G1-15S(SUS）	G-PS15	G15S-WS(SUS）	-	-	-	G1-15S-SET-AS
	G1-20S(SUS）	G-PS20	G20S-WD(SUS）	-		-	G1-20S-SET-AS
Ｂ	G2-15	G-PS15	G15-WS	-	G15-MD	-	G2-15-SET-B	②
	G2-20	G-PS20	G20-WD	-	G20-MD	-	G2-20-SET-B
	G1-15S(SUS）	G-PS15	G15-WS	-	G15-MD	-	G1-15S-SET-B
	G1-20S(SUS）	G-PS20	G20-WD	-	G20-MD	-	G1-20S-SET-B
	G1-15S(SUS）	G-PS15	G15S-WS(SUS）	-	G15-MD	-	G1-15S-SET-BS
	G1-20S(SUS）	G-PS20	G20S-WD(SUS）	-	G20-MD	-	G1-20S-SET-BS
Ｃ	G2-15	G-PS15	G15-WS	-	-	G15-FD	G2-15-SET-C
	G2-20	G-PS20	G20-WD	-	-	G20-FD	G2-20-SET-C
	G1-15S(SUS）	G-PS15	G15-WS	-	-	G15-FD	G1-15S-SET-C
	G1-20S(SUS）	G-PS20	G20-WD	-	-	G20-FD	G1-20S-SET-C
	G1-15S(SUS）	G-PS15	G15S-WS(SUS）	-	-	G15-FD	G1-15S-SET-CS
	G1-20S(SUS）	G-PS20	G20S-WD(SUS）	-	-	G20-FD	G1-20S-SET-CS
Ｄ	G2-15	G-PS15	G15-WS	G15-BD	-	-	G2-15-SET-D	③
	G2-20	G-PS20	G20-WD	G20-BD	-	-	G2-20-SET-D
	G1-15S(SUS）	G-PS15	G15-WS	G15-BD	-	-	G1-15S-SET-D
	G1-20S(SUS）	G-PS20	G20-WD	G20-BD	-	-	G1-20S-SET-D
	G1-15S(SUS）	G-PS15	G15S-WS(SUS）	G15S-BD(SUS）	-	-	G1-15S-SET-DS
	G1-20S(SUS）	G-PS20	G20S-WD(SUS）	G20S-BD(SUS）	-	-	G1-20S-SET-DS
Ｅ	G2-15	G-PS15	G15-WS	G15-BD	G15-MS	-	G2-15-SET-E
	G2-20	G-PS20	G20-WD	G20-BD	G20-MS	-	G2-20-SET-E
	G1-15S(SUS）	G-PS15	G15-WS	G15-BD	G15-MS	-	G1-15S-SET-E
	G1-20S(SUS）	G-PS20	G20-WD	G20-BD	G20-MS	-	G1-20S-SET-E
	G1-15S(SUS）	G-PS15	G15S-WS(SUS）	G15S-BD(SUS）	G15-MS	-	G1-15S-SET-ES
	G1-20S(SUS）	G-PS20	G20S-WD(SUS）	G20S-BD(SUS）	G20-MS	-	G1-20S-SET-ES
Ｆ	G2-15	G-PS15	G15-WS	G15-BD	-	G15-FS	G2-15-SET-F
	G2-20	G-PS20	G20-WD	G20-BD	-	G20-FS	G2-20-SET-F
	G1-15S(SUS）	G-PS15	G15-WS	G15-BD	-	G15-FS	G1-15S-SET-F
	G1-20S(SUS）	G-PS20	G20-WD	G20-BD	-	G20-FS	G1-20S-SET-F
	G1-15S(SUS）	G-PS15	G15S-WS(SUS）	G15S-BD(SUS）	-	G15-FS	G1-15S-SET-FS
	G1-20S(SUS）	G-PS20	G20S-WD(SUS）	G20S-BD(SUS）	-	G20-FS	G1-20S-SET-FS

Note:Clear painting for Stainless steel type can be provided,if requested.

Exaplanation for Part No. of Setting Installation Method A,B,C,D,E,F Material of louver Nothing:Steel type S:Stainless steel type Louver size 15 : W = 200mm 20 : W = 250mm Thickness of ventilationg louver 1 : 1.5mm thick 　　(Stainless steel type) 2 : 2.3mm thick(steel type) Material of Holding frame and Blow prevention cover Nothing : Steel type S : Stainless steel type
	Attention : Fix the bolts with the nuts equally and the suitable fixing torque is 1.5 N/m ( 15 kgf/cm ). Note: The specification of the products will be changed for the improvement before the information will be released.

▲PAGE TOP

List of Louver exterior components

OUTLINE①

Part No. of Setting	Ｗidth（mm）
G2-15-SET-A	200
G2-20-SET-A	250
G1-15S-SET-A	200
G1-20S-SET-A	250
G1-15S-SET-AS	200
G1-20S-SET-AS	250

OUTLINE②

Part No. of Setting	Ｗidth（mm）
G2-15-SET-B	200
G2-20-SET-B	250
G1-15S-SET-B	200
G1-20S-SET-B	250
G1-15S-SET-BS	200
G1-20S-SET-BS	250

Part No. of Setting	Ｗidth（mm）
G2-15-SET-C	200
G2-20-SET-C	250
G1-15S-SET-C	200
G1-20S-SET-C	250
G1-15S-SET-CS	200
G1-20S-SET-CS	250

OUTLINE③

Part No. of Setting	Ｗidth（mm）
G2-15-SET-D	200
G2-20-SET-D	250
G1-15S-SET-D	200
G1-20S-SET-D	250
G1-15S-SET-DS	200
G1-20S-SET-DS	250
G2-15-SET-E	200
G2-20-SET-E	250
G1-15S-SET-E	200
G1-20S-SET-E	250
G1-15S-SET-ES	200
G1-20S-SET-ES	250

Part No. of Setting	Ｗidth（mm）
G2-15-SET-F	200
G2-20-SET-F	250
G1-15S-SET-F	200
G1-20S-SET-F	250
G1-15S-SET-FS	200
G1-20S-SET-FS	250

▲PAGE TOP

Specification of each component

■　Ventilating louver

Part No.	A	B	C	Material	Panel opening area（cm2）	Panel cutting size D×E
G2-15	200	177	150	Steel plate2.3mm thick Surfacefinishing: Antirust painting	75	235×185
G2-20	250	227	200	Steel plate2.3mm thick Surfacefinishing: Antirust painting	105	235×235
G1-15S	200	177	150	SUS 1.5mm thick Surface finishing:Hairline finish	75	235×185
G2-20S	250	227	200	SUS 1.5mm thick Surface finishing:Hairline finish	105	235×235

Note:

1) Antitrust paint: Product P/N 050-4113 of ROCK PAINT Co., Ltd. Japan
The special panting to the final coating can be provided, if necessary.
2) The clear painting for Stainless steel type can be provided, if requested.
3) The panel opening area means the panel cutting area of the front of a louver.

■　Holding frame

Part No.	A	B	C	Material
G15-WS	200	142	130	Steel plate1.6mm thick,Trivalent Chromate plating
G20-WD	250	192	180	Steel plate1.6mm thick,Trivalent Chromate plating
G15S-WS	200	142	130	SUS 1.5mm
G20S-WD	250	192	180	SUS 1.5mm

■　Blow prevention cover

Part No.	A	B	C	Material
G15-BD	197	142	-	Steel plate1.6mm thick , Surface finishing:Antirust painting
G20-BD	245	192	-
G15S-BD	197	142	-	SUS 1.5mm
G20S-BD	245	192	-	SUS 1.5mm

■　Insect screen and Dust-proof filter

	Part No.	A	Material
Insect screen	G15-MD	165	Stainless steel screen with stainless steel frame
	G20-MD	215
	G15-MS	138
	G20-MS	187
Dust-proof filter	G15-FD	165	Saranhanikam finishing with stainless steel frame
	G20-FD	215
	G15-FS	138
	G20-FS	187

Note: The specification of the products will be changed for the improvement before the information will be released.

↑PAGE TOP