TOP ＞Product＞Display plate・Label ＞The protection sheet made of SUS PS-5070 |
|
|
| The protection sheet made of SUS PS-5070 |
 |
■Operation example
| ①Protection from a clasp |
|
②Protection from a rod stick |
 |
|
 |
|
|
|
Please use it for the board surface including a clasp and the lot stick and the protection
from the point to rub against (the wound is turned on). |
|
1.Since it is with adhesion material (double-stick tape),
it is not necessary to carry out bending of the thin board like the former only by sticking on
a part to protect from a crack as it is, and to prepare protection metal fittings.
2.All things can be protected not only from a clasp or a rod stick but from all abrasions.
3.In the direction of a library temple (70-mm direction),
manufacture in special order size is also possible. Please consult. |
| Material |
4-R5
Separator
70
50
Stainless steel foil
Acrylics system adhesion material
|
| Stainless With adhesion material |
Item |
Unit |
Measured value |
Stainless steel foil thickness |
mm |
0.04 |
Tensile strength |
N/10mm |
196 |
Elongation |
％ |
5 |
Adhesive power |
N/10mm |
13.7 |
|
Even if it imposes the friction load of 1000 round trips in the edge part of steel materials, a tear does not occur.
※Adhesive power: Apply to JIS Z 0237.
※The numerical value of a statement is one example of measured value, and is not a guaranteed performance.
※Since there is a possibility of getting incision injured in the end face of this article, be careful of handling enough.
|
| ▲PAGE TOP |
|
