|
Supporter (Low voltage insulated Supporter to the Conductor )
|
 |
|
It can be used as the insulating supporter for mounting instruments to Distribution Panel Board, Control Board, Rectifier Board, and the wiring of Bus bars and Wires. The distribution metal will be attached to the top of the supporter, then it can be used as the distribution stand |
|
1)Two sided nut (S,T and D Type) and Nut and Bolt ( SB,TB and DB
Type) are prepared and those are can be selected for the application.
2)Insulating property are excellent as the creeping flush over voltage of the insulating supporter is more than 2.5 kV AC 1 min.
It is light weight and is not easily broken. |
Material |
| Polypropylene (Black color) |
|
※The fixing torque of screw terminal of wiring accessories in acccordance with JIS-C-8306
Nominal diameter for screw terminal(mm) |
4 |
5 |
6 |
|
| The fixing torqueN・m（kgf・cm） |
1.2(12) |
2.0(20) |
2.5(25) |
5.5(55) |
|
|
| ▲PAGE TOP |
|
Two Screw embded Type Supporter Type:SS・DD
|
Example of installation
 |
|
It can be used as the insulating supporter for mounting instruments to Distribution Panel Board, Control Board, Rectifier Board, and the wiring of Bus bars and Wires. The distribution metal will be attached to the top of the supporter, then it can be used as the distribution stand |
|
1) Hand works for the insulating material will not be needed for the support.
2) Good insulating property ( Longitudinal flush over Voltage : More than 2.5 kV 1 min ), light weight and not easily broken. |
Materials |
Reinforced Polypropylene resin ( Black color )
Insert Nut : Chromate plating steel ,
Nut and Bolt : Trivalent Chromate plating steel |
Part Number |
H
（mm） |
A
（mm） |
B
（mm） |
D
（mm） |
C×Effective
depth (mm) |
Package quantity |
SS-25
|
25 |
45 |
25 |
20 |
2-M6×8
|
50 pcs for bag
300 pcs for box |
DD-50
|
50 |
50 |
35 |
25 |
2-M6×8
|
25 pcs for bag
250 pcs for box |
| DD-50-8 |
50 |
50 |
35 |
20 |
2-M8×11
|
25 pcs for bag
250 pcs for box |
The fixing torque of the terminal screws for the wiring accessories
are based on JIS-C-8306 and shown in the next table.
Nominal diameter of
the terminal screw （mm） |
6 |
8 |
Fixing Torque N-m
（kgf・cm） |
2.5
(25) |
5.4
(55) |
|
|
| ▲PAGE TOP |
|
SPS(Heater-resistant tupe)
|
NEW Product Supporter SPS(Heat-resistant type)
Double-sided bolt type
Nut,bolt type
|
|
Please use it for the insulating stand for setting of distribution panel,
distribution board,control panel rectifier board and also for the insulating support for wiring of bus-bar and electric cable. |
|
It is molded by syndiotacticpolystyrene which is one of the lightest resin
among the engineering plastic materials and has greater heat resistance.
Furthermore,it has high tolerance to oil,solvent of aliphatic system as
chemical resistance. |
Materials |
Syndiotacticpolystyrene(SPS)GF 30%
※Insert nut is pretreated by iron trivalent chromate. |
| Dielectric withstanding voltage |
| 2.5KV one minute |
Part Number |
H
（mm） |
A
（φ） |
C×Effective
depth(mm) |
C×Effective
length (mm) |
| SMB-20-5-SPS |
20 |
15 |
M5×5.5 |
M5×13 |
| SB-20-5-SPS |
20.5 |
20.5 |
M5×5.5 |
M5×11 |
Part Number |
H
（mm） |
A
（φ） |
C×Effective
depth(mm) |
| S-25-SPS |
25.5 |
25 |
M6×8 |
| T-35-SPS |
35 |
35 |
M8×10 |
| D-50-SPS |
51 |
40 |
M8×11 |
|
|
| ▲PAGE TOP |
